{"title":"Лепила","description":"","products":[{"product_id":"lepilo-za-tezhki-tapeti-extra-spetsial","title":"Adhesive for heavy wallpaper Extra Special 200 g.","description":"\u003cp\u003e200 g; ready to use after 30 min; covers 20-25 m2 \/ for 4-5 rolls; Carboxymethyl cellulose adhesive, reinforced with synthetic resin. For heavy paper-based and fiberboard wallpapers. Skin-safe pH level. Suitable for fiberboard, paper, vinyl and washable wallpapers. Preparing the adhesive: Pour the contents of the package into clean, distilled water while stirring constantly. Leave to stand for about 30 minutes, then stir vigorously again. Preparing the substrate: The substrate must be dry, clean, smooth and sound. Remove any adhesive residue, old wallpaper and flaking paint. Fill cracks, holes and unevenness on the walls with a smooth putty. Treat plasterboard, gypsum or flaky plaster with PUFAS deep-penetrating primer. Absorbent surfaces should be primed beforehand. Rough plasters should be covered with waste paper beforehand. Wallpapering: Heavy wallpapers, e.g. fibreboard and PVC wallpapers, should be generously coated with adhesive. The strips are folded and after a certain soaking time they are glued without overlapping. For vinyl and PVC wallpapers, press the edges with a suitable roller. Be sure to follow the wallpaper manufacturer's instructions. Store in a dry and cool place. Do not use at temperatures below +5° C.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489391878410,"sku":"61102901","price":2.81,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61102901.jpg?v=1719470070"},{"product_id":"lepilo-za-raufazer-i-tapeti-za-banya-mc-raufaser","title":"Adhesive for raufaser and bathroom wallpaper MC Raufaser 200 g.","description":"\u003cp\u003e200 g; ready in 10-15 min; covers 20-25 m2 \/ for 4-5 rolls; Methyl cellulose adhesive with PVA resin. For all types of rough fiberboard, wallpaper for painting and heavy vinyl wallpaper. Very high degree of moisture resistance including when painting the wallpaper. Dries transparent. Special adhesive with high moisture resistance, suitable for rough fiberboard (wallpaper for painting), heavy vinyl and structural wallpapers. Transparent after drying; Pure methyl cellulose with adhesive-strengthening resin; High initial adhesion strength; Suitable for glue application device; Preparation: The substrate must be dry, sound and free from dust and grease. Old wallpaper should be removed with \"PUFAS TAP-EX\". Cracks and holes should be filled with \"PUFAS putty\". Highly absorbent, crumbly or lime substrates should be primed with \"PUFAS primer\". Gluing: Pour the contents of the package into 4 liters of cold clean water while stirring constantly and vigorously. After 15 minutes, stir well again. Spread the wallpaper evenly with glue and fold in half. After the required soaking time, glue it without overlapping. Follow the wallpaper manufacturer's instructions. Wipe off any glue residue on the wallpaper with a clean, damp cloth. After work, clean the tools with water. Do not glue below +5° C. Store in a dry place.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489392075018,"sku":"61120402","price":7.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61120402.jpg?v=1719470082"},{"product_id":"gotovo-lepilo-za-tapeti","title":"Ready glue for wallpaper Special 2.5 kg.","description":"\u003cp\u003e2.5 kg; ready to use immediately; consumption 200 – 250 g\/m2; Ready-to-use methyl-cellulose adhesive reinforced with synthetic resin. For gluing rough fiber wallpaper and all types of wallpaper - heavy, for bathroom, textile and fleece. High degree of moisture resistance.Ready-to-use methyl-cellulose adhesive reinforced with synthetic resin. High degree of moisture resistance including when painting the wallpaper. Does not freeze down to -20° C. Skin-safe pH-level.For quick and secure gluing of all types of wallpaper - heavy, for bathroom, textile, fleece and rough fiber; Adheres to new and old plasters, incl. lime and cement; Adheres to plasterboard; Adheres firmly even in the joint area: Ready to use immediately; Consumption 200-250g\/sq.m; 2.5kg is enough for 12.5 sq.m.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489392271626,"sku":"61121504","price":15.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61121504.jpg?v=1719470095"},{"product_id":"lepilo-za-flis-tapeti-euro-3000-indicator-blue-control-200-gr","title":"Adhesive for fleece wallpaper Euro 3000 Indicator Blue Control 200 g.","description":"\u003cp\u003e200 g; ready to use after 5 min; 200 g - covers 25-30 m2 \/ for 5-6 rolls; Strong initial adhesion with PVA resin. For fleece-based wallpapers. The dissolved adhesive has a blue indicator to control even application. Allows easy correction during gluing. Becomes transparent after drying; For all types of fleece wallpapers; Ready to use after 5 minutes; Antibacterial; Easy to stir, no lumps; High adhesive strength and moisture resistance through PVA additive; Substrate preparation: The substrate must be dry, sound and clean of dust and grease. Old wallpapers should be removed with \"PUFAS TAP-EX\". Cracks and holes should be filled with \"PUFAS putty\". Highly absorbent, crumbly or lime substrates should be primed with \"PUFAS primer\". Preparing the glue: Pour the contents of the package into 4 liters of cold, clean water while stirring constantly and vigorously. After 5 minutes, stir well again and the finished glue will turn blue. Gluing: Applying the glue to the wall: When gluing non-deformable wallpapers, as well as many other wall coverings, the glue can be applied directly to the base with a roller or brush. Apply the glue evenly across the width of 1-2 wallpaper strips. Place the wallpaper strips directly on the spread glue and press evenly. When applying glue to the wallpaper: Apply the glue evenly to the wallpaper using a brush, glue without overlapping and press. The glue becomes transparent after drying. Follow the wallpaper manufacturer's instructions. Immediately wipe off any glue residue on the wallpaper with a clean, damp cloth. Do not glue at room temperatures below +5° C.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489392402698,"sku":"61121701","price":5.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61121701.jpg?v=1719470107"},{"product_id":"lepilo-za-flis-tapeti-euro-3000-indicator-blue-control-big","title":"Adhesive for fleece wallpaper Euro 3000 Indicator Blue Control 300 g.","description":"\u003cp\u003e300 g; ready to use after 5 min; 300 g - covers 35-45 m2 \/ for 8-9 rolls; Strong initial adhesion with PVA resin. For fleece-based wallpapers. The dissolved adhesive has a blue indicator to control even application. Allows easy correction during gluing. Vlies blue-control Kleber; Adhesive for fleece wallpaper with application control using a blue indicator; Becomes transparent after drying; For all types of fleece wallpaper; Ready to use after 5 minutes; Antibacterial; Easy to stir, no lumps; High adhesive strength and moisture resistance through PVA additive; Preparation of the substrate: The substrate must be dry, sound and free of dust and grease. Old wallpapers can be removed with \"PUFAS TAP-EX\". Cracks and holes should be filled with \"PUFAS putty\". Highly absorbent, crumbly or lime-based substrates should be primed with \"PUFAS primer\". ; Preparing the adhesive: Pour the contents of the package into 6 l of cold, clean water while stirring constantly and vigorously. After 5 minutes, stir well again and the finished adhesive will turn blue. Gluing: Applying the adhesive to the wall: When gluing non-deformable fleece wallpapers, as well as many other wall coverings, the adhesive can be applied directly to the substrate with a roller or brush. Apply the adhesive evenly across the width of 1-2 wallpaper strips. Place the wallpaper strips directly on the spread adhesive and press evenly. When applying the adhesive to the wallpaper: Apply the adhesive evenly to the wallpaper with a brush, stick without overlapping and press. The adhesive becomes transparent after drying. Follow the manufacturer's instructions. wallpaper. Any glue residue on the wallpaper should be immediately wiped off with a clean, damp cloth. Do not apply at temperatures below +5°C. Store in a cool, dry place.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489392763146,"sku":"61121702","price":7.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61121702.jpg?v=1719470121"},{"product_id":"lepilo-za-flis-tapeti-euro-3000","title":"Adhesive for fleece wallpaper Euro 3000 200 g.","description":"\u003cp\u003e200 g; ready to use after 5 min; 200 g covers 25-30 m2\/ for 5-6 rolls; Strong initial adhesion with PVA resin. For fleece-based wallpapers. Dries transparent. Acts antibacterially. Allows easy correction during gluing. For gluing fleece wallpapers by applying the glue to the wall; Ready to use after 5 minutes; Excellent distribution of the glue; With an additive that enhances adhesion; Becomes transparent after drying; No lumps are formed when stirring; Preparation of the base: The base must be dry, sound and clean of dust and grease. Old, poorly glued wallpapers should be removed with \"PUFAS TAP-EX\" wallpaper remover. Cracks and holes should be filled with \"PUFAS filling putty\". Highly absorbent, crumbly or lime-based substrates should be primed with \"PUFAS deep-penetrating primer\". Gluing: Pour the contents of the package into 4 l. cold, clean water while stirring constantly and vigorously. After 5 minutes, stir well again. Applying the adhesive to the wall: When gluing non-deformable fleece wallpapers, as well as many other wall coverings, wallpaper manufacturers recommend applying the adhesive directly to the wall. To do this, use a roller (made of sheepskin) to evenly apply the adhesive across the width of 1-2 wallpaper strips. Place the wallpaper strips directly on the spread adhesive and press evenly. When applying the adhesive to the wallpaper: When applying the adhesive to the wallpaper: Apply the adhesive evenly to the wallpaper and fold the adhesive strip towards each other. Follow the gluing instructions and the softening time given by the wallpaper manufacturer. Remove any adhesive residue on the wallpaper with a clean, damp cloth. After use, clean the tools used with water. Do not stick at temperatures below +5°C. Store in a cool, dry place.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489393484042,"sku":"61121901","price":5.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61121901.jpg?v=1719470134"},{"product_id":"lepilo-za-tapeti-euro-3000-spetsial-small","title":"Wallpaper glue Euro 3000 Special 200 g.","description":"\u003cp\u003e200 g; ready to use after 5 min; 200 g - covers 25-30 m2 \/ for 5-6 rolls; Strong initial adhesion with PVA resin. Dries transparent. For heavy and light paper-based wallpapers, for rough-fiber wallpapers. Antibacterial, allows slight corrections when gluing. For all types of vinyl, PVC and paper wallpapers; Ready to use after 5 minutes; Excellent distribution of the adhesive; High adhesive strength - with PVA additive; Dries transparent; Easy to stir, no lumps; preparation of the base: the base must be dry, sound and clean of dust and grease. Old wallpapers should be removed with \"PUFAS TAP-EX\". Cracks and holes should be filled with \"PUFAS putty\". Highly absorbent, crumbly or lime bases should be primed with \"PUFAS primer\". Preparation of the glue: Pour the contents of the package into 4 liters of cold and clean water while stirring constantly and vigorously. After 5 minutes, stir well again. Gluing: Apply the glue evenly to the wallpaper and fold the wallpaper strip. After the required softening time, glue without overlapping. Follow the wallpaper manufacturer's instructions. Wipe off any glue residue on the front side of the wallpaper with a clean damp cloth or sponge. After use, clean the tools used with water. Do not glue at room temperatures below +5°C. Store in a cool, dry place.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489396400394,"sku":"61122101","price":4.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61122101.jpg?v=1719470147"},{"product_id":"lepilo-za-tapeti-euro-3000-spetsial-big","title":"Wallpaper glue Euro 3000 Special 300 g.","description":"\u003cp\u003e300 g; ready to use after 5 min; 300 g - covers 35-45 m2 \/ for 8-9 rolls; Strong initial adhesion with PVA resin. Dries transparent. For heavy and light paper-based wallpapers, for rough-fiber wallpapers. Has an antibacterial effect, allows slight corrections when gluing. Preparation of the adhesive: Pour the contents of the package into clean, cold water with constant stirring and mix well. Leave to stand for 5 minutes, then stir vigorously once more. Preparation of the substrate: The substrate must be dry, clean, smooth and sound. Remove glue residues, old wallpaper and flaking paint. Fill cracks, holes and unevenness on the walls with smooth putty. Treat highly absorbent or crumbly substrates with PUFAS deep penetrating primer. Cover rough plasters with waste paper in advance. Wallpapering: Apply the adhesive evenly to the cut wallpaper strips, fold them and wait for them to absorb, then stick them without overlapping. For very heavy wallpapers, poorly absorbent substrates or damp rooms, we recommend adding 750g. of wall covering adhesive. Be sure to follow the wallpaper manufacturer's instructions.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489397940490,"sku":"61122102","price":7.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61122102.jpg?v=1719470160"},{"product_id":"lepilo-za-tapeti-euro-3000-indicator-pink-control-small","title":"Wallpaper glue Euro 3000 Indicator Pink Control 200 g.","description":"\u003cp\u003e 200 g; ready to use after 5 min; 200 g. - covers 25-30 m2 \/ for 5-6 rolls; Strong initial adhesion with PVA resin For heavy and light paper-based wallpapers, for raufiber wallpapers. The dissolved glue has a pink indicator to control even application.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489398202634,"sku":"61122401","price":4.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61122401.jpg?v=1719470175"},{"product_id":"lepilo-za-tapeti-euro-3000-indicator-pink-control-big","title":"Wallpaper glue Euro 3000 Indicator Pink Control 300 g.","description":"\u003cp\u003e300 g; ready to use after 5 min; 300 g - covers 35-45 m2 \/ for 8-9 rolls; Strong initial adhesion with PVA resin For heavy and light paper-based wallpapers, for rough-fiber wallpapers. The dissolved glue has a pink indicator to control even application. SPECIAL glue with color control of application using a pink indicator; With a fresh lemon scent; Becomes transparent after drying; For vinyl, PVC, rough-fiber and other heavy wallpapers; High adhesive strength through PVA additive; Antibacterial; Ready to use after 5 minutes; Preparation of the base: The base must be dry, sound and clean of dust and grease. Old wallpapers should be removed with a wallpaper remover. Cracks, holes and irregularities should be filled with \"PUFAS putty\". Highly absorbent, crumbly or lime-based substrates should be primed with deep-penetrating \"PUFAS primer\". Preparation of the adhesive: Pour the contents of the package into 6 l of cold, clean water while stirring constantly and vigorously. After 5 minutes, stir well again and the finished adhesive will turn pink. Bonding: Apply the adhesive evenly to the wallpaper using a brush and fold the wallpaper strip. The pink color ensures that the adhesive is evenly applied to the wallpaper. After the required softening time, bond without overlapping. Absorb any adhesive residue with a brush, cloth or sponge. After use, clean the tools used with water. Follow the wallpaper manufacturer's instructions. Do not bond at room temperatures below +5°C. Store in a cool, dry place.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489398333706,"sku":"61122402","price":7.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61122402.jpg?v=1719470188"},{"product_id":"lepilo-za-tapeti-euro-3000-indicator-pink-control-kofa","title":"Wallpaper glue Euro 3000 Indicator Pink Control 10 kg.+bucket+mixer","description":"\u003cp\u003e 10 kg; ready to use after 5 min; + bucket + stirrer; Strong initial adhesion with PVA resin For heavy and light paper-based wallpapers, for rough-fiber wallpapers. The dissolved glue has a pink indicator to control even application.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489398563082,"sku":"61122403","price":122.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61122403.jpg?v=1719470200"},{"product_id":"lepilo-tapeti-normal-125-g","title":"Wallpaper glue Normal 125 g.","description":"\u003cp\u003ePVA-based adhesive. For single-layer and double-layer paper wallpapers. Dries colorless. Skin-safe pH level.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489398628618,"sku":"61128010","price":2.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61128010.jpg?v=1719470213"},{"product_id":"lepilo-tapeti-spetsial-200-g","title":"Wallpaper glue Special 200 g.","description":"\u003cp\u003e Carboxymethyl cellulose adhesive reinforced with synthetic resin. For heavy paper-based and fibreboard wallpapers. Skin-safe pH level.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489398825226,"sku":"61129010","price":3.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61129010.jpg?v=1719470228"},{"product_id":"lepilo-za-ekskluzivni-tapeti-glutolin-rubin-gtx","title":"Glue for exclusive wallpapers Glutolin Rubin GTX 200 gr.","description":"\u003cp\u003e200 g; ready to use after 30 min; covers 15-20 m2 \/ for 3-4 rolls; Elite glue with methyl cellulose and PVA. For very heavy wallpapers. For expensive and designer wallpapers. Strong instant adhesion. Dries colorless. Elite glue for elite wallpapers - vinyl and fleece. High moisture resistance. Very high initial adhesion strength. With added dispersion glue. Suitable for spraying with a gun. Preparation: 1. Fill cold water (see table) into a clean bucket; 2. Stir the water; 3. While stirring, pour the glue into the water; 4. After 30 min. stir vigorously and start gluing. Preparation of the base: The base must be dry, clean, smooth, non-crumbling and evenly absorbent. Remove old wallpapers and crumbly paint. Fill cracks with \"smooth putty\". Prime highly absorbent and crumbly substrates with \"Pufas deep penetration primer\". For weakly absorbent substrates, glue waste paper. Paint substrates that differ in color with white \"wallpaper primer\". Application to the wallpaper: Spread the wallpaper evenly with glue and fold the strips. Observe the absorption time given by the wallpaper manufacturer. Application to the wall: For fleece wallpaper, apply the glue evenly using a short-pile roller (e.g. from Mako) directly onto the wall in strips. Place the wallpaper strip on the glue and press it down. After work, wash the utensils and tools used with water.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489399021834,"sku":"61162331","price":10.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61162331.jpg?v=1719470241"},{"product_id":"stiroporno-lepilo-pufas-1kg","title":"Styrofoam glue Pufas 1 kg.","description":"\u003cp\u003e1 kg; ready to use immediately; consumption approx. 500 - 900 g\/m2; Styrene-acrylate dispersion for interior use. For bonding ceiling tiles and decorative moldings and profiles made of polystyrene and rigid foam. For repair fleece under wallpaper and insulation boards (depron). The substrate must be sound, dry, absorbent and free of dust and grease. Remove poorly adhered wallpaper or old paint with PUFAS putty. Fill cracks, holes and unevenness on the walls with PUFAS putty. Treat mortar, crumbly or highly absorbent substrates with PUFAS deep-penetrating primer. Apply the adhesive evenly to the substrate with a notched trowel (recommended size B2). Place the strips or boards to be bonded on the adhesive and press them evenly. For gluing ceiling tiles, it is recommended to apply the adhesive exactly on the back of the tile. After the adhesive has dried, the treated areas can be painted, plastered or wallpapered. To achieve optimal adhesion when painting or wallpapering, prime the polystyrene areas with polystyrene adhesive diluted with 20% water, which is applied with a roller. Do not use at temperatures below +5° C. Remove excess adhesive immediately with water.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489399349514,"sku":"61101101","price":5.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61101101.jpg?v=1719470253"},{"product_id":"stiroporno-lepilo-pufas-4kg","title":"Styrofoam glue Pufas 4 kg.","description":"\u003cp\u003e4 kg; ready to use immediately; consumption approx. 500 - 900 g\/m2; Styrene-acrylate dispersion for interior use. For bonding ceiling tiles and decorative moldings and profiles made of polystyrene and rigid foam. For repair fleece under wallpaper and insulation boards (depron). The substrate must be sound, dry, absorbent and free of dust and grease. Remove poorly adhered wallpaper or old paint with PUFAS putty. Fill cracks, holes and unevenness on the walls with PUFAS putty. Treat mortar, crumbly or highly absorbent substrates with PUFAS deep-penetrating primer. Apply the adhesive evenly to the substrate with a notched trowel (recommended size B2). Place the strips or boards to be bonded on the adhesive and press them evenly. For gluing ceiling tiles, it is recommended to apply the adhesive exactly on the back of the tile. After the adhesive has dried, the treated areas can be painted, plastered or wallpapered. To achieve optimal adhesion when painting or wallpapering, prime the polystyrene areas with polystyrene adhesive diluted with 20% water, which is applied with a roller. Do not use at temperatures below +5° C. Remove excess adhesive immediately with water.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489399513354,"sku":"61101102","price":15.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61101102.jpg?v=1719470266"},{"product_id":"lepilo-za-stenni-pokritiya-i-frizove","title":"Adhesive for wall coverings and friezes 750 g.","description":"\u003cp\u003e750 g; ready to use immediately; consumption approx. 250 g\/m2; High initial adhesion. For wall coverings and friezes, for fibreglass. Strengthens the adhesion of adhesives for vinyl, textile, embossed, PVC and natural fabric wallpapers. For vinyl on vinyl. Ready-to-use dispersion adhesive for gluing textile wall coverings, PVC foils, with textile backing, and also as a supplement to wallpaper adhesive. The substrate must be dry, sound and free from dust and grease. Old wallpaper and peeling old paint must be removed using PUFAS - wallpaper remover. Cracks, holes and unevenness should be leveled with PUFAS - indoor putty. Highly absorbent, sanded or whitewashed walls should be treated with PUFAS - wallpaper primer - deep penetrating. How to use: As a wall covering adhesive: Apply the adhesive evenly to the wall, using a brush or roller, the width of the strip you want to stick and stick it to the still wet base. If it is prescribed to apply the adhesive directly to the wall covering, it is expected that it will absorb the adhesive and soften accordingly. In any other case, the instructions of the wall covering manufacturer are followed; As an adhesive for friezes: Wet the friezes with water and then apply the adhesive thinly and evenly. Roll the friezes into a roll and let them soften and absorb the adhesive. After the prescribed softening and absorption time has elapsed, stick the friezes carefully and evenly. Follow the instructions of the frieze manufacturer; As an addition to wallpaper adhesive: With this product, you can strengthen the strength and moisture resistance of the wallpaper adhesive. Mix it into the ready-mixed wallpaper adhesive carefully. The optimal amount you can add is about 15-20%, e.g. one 750g dose of the adhesive for wall coverings and friezes to 4l. of mixed wallpaper adhesive. Remove any remaining adhesive immediately with a damp cloth. Do not use at room temperatures below +5° C. Store in a cool, but not cold place! Tie the packaging tightly.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489399742730,"sku":"61101201","price":7.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61101201.jpg?v=1719470279"},{"product_id":"montazhno-universalno-lepilo","title":"Universal assembly glue tube 300 g.","description":"\u003cp\u003e300 g; ready to use immediately; consumption 300 – 500 g\/m2, enough for 12-20 l.m; Copolymer plastic dispersion. Glues wood, polystyrene, PVC, ceramic tiles, MDF and wooden skirting boards, decorative elements, insulating boards. For indoor use. No thinners. Glues quickly, cleanly and securely. Quickly, cleanly and securely; No drilling and screws; No thinners; For indoors; For gluing wood, PVC, polystyrene, tiles, etc. The base must be dry, strong-bearing, absorbent and free of dust and grease. Sandy and calcareous bases should be treated with a deep-penetrating primer. Before use, knead the tube well. Apply the assembly adhesive in dots or in strips on the parts to be glued and press them well. Hold heavy parts fixed until the adhesive hardens. Remove adhesive residues immediately with water. Open time (before the adhesive hardens): 20-30 minutes. Drying time: about 24 hours. Do not work below +5°C. Store in a cool place, but not below 0°C.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489400135946,"sku":"61101606","price":6.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61101606.jpg?v=1719470292"},{"product_id":"lepilo-za-podlepvane-na-tapeti-i-snadki","title":"Glue for wallpaper and joints 60 g.","description":"\u003cp\u003e60 g; ready to use immediately; Polyvinyl acetate-ethylene dispersion; Very high initial adhesion; For quick bonding of loose wallpaper joints on all substrates. For bonding around windows, doors and radiators. For reinforcing joints in corners; Bonds vinyl to vinylDispersion adhesive, suitable for bonding all types of wallpaper on all substrates. Apply directly from the tube, evenly onto the wallpaper or substrate. Press the peeled edge. Drying time 10-15 min. Store in a cool, but not cold place.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489400299786,"sku":"61101801","price":3.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61101801.jpg?v=1719470304"},{"product_id":"click-safe-zashtita-na-laminat-fuga-sreshtu-naduvane","title":"Click-Safe laminate joint protection, against swelling 250 g.","description":"\u003cp\u003e250 g; ready to use immediately; 250 g is sufficient for 10-15 m2; Long-lasting protection of laminate joints from moisture and dirt. After drying, it sticks permanently and is water and moisture-proof. It dries transparent, leaving no stains. Cold-resistant. The special wax dispersion protects laminate and finished parquet floors from moisture and dirt penetration for a long time. This prevents the floor covering from swelling. The substance becomes transparent and waterproof after drying. When installing, apply Click-Safe to the top edge and install the covering as usual. Wipe off any residue immediately with a damp cloth. After drying (approx. 24 hours), a transparent protective coating is created. Do not process below +5°C. After use, clean the tools used with water. ATTENTION: it is not possible to disassemble for reuse. If the tube freezes, let it thaw, then wring it out well.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489400594698,"sku":"61108302","price":7.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61108302.jpg?v=1719470330"},{"product_id":"lepilo-za-staklofazer-i-mnogo-tezhki-stenni-pokritiya-gk","title":"Adhesive for fiberglass and very heavy wall coverings GK10 500 g.","description":"\u003cp\u003e500 g; ready in 15 min; consumption: covers 50 m2; Methyl cellulose adhesive with PVA resin and high solids content with strong adhesion. For glass fibre and reinforcing repair fleece, for rough fibre wallpaper and all types of wallpaper. For glass fibre wallpaper, repair and reinforcing fleece, heavy wall coverings; Extremely high solids content for optimal adhesion; High moisture resistance; High methyl cellulose content; For all types of wallpaper; Substrate preparation: the substrate must be dry, sound and free from dust and grease. Old, poorly adhered wallpaper must be removed. Cracks and holes must be filled with \"PUFAS filling putty\". Highly absorbent, crumbly or calcareous substrates must be primed with \"PUFAS deep penetration primer\". Preparation of the adhesive: pour the contents of the package into 5 l. cold and clean water while stirring constantly and vigorously. After 15 minutes, stir vigorously again. Application: If you are applying non-deformable wallpaper or wall coverings, apply the adhesive to the wall using a short-haired sheepskin roller or a sprayer. Place the wallpaper\/wall covering on the spread adhesive and press it evenly with a clean roller. For wall coverings that are suitable for this, the adhesive can be applied with an applicator or with a brush to the back of the covering. Follow the application instructions given by the manufacturer of the covering or wallpaper. Do not apply at room temperatures below +5° C. Wash off any adhesive residue with clean water and remove with a clean cloth. After use, clean the tools used with water. Consumption rate: 5.5 kg for 25-30 m2. When stored in a cool, dry place, the shelf life is at least 5 years.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489400791306,"sku":"61120911","price":12.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61120911.jpg?v=1719470342"},{"product_id":"stroitelno-lepilo-k15-prozrachno","title":"Construction glue K15, transparent 290 g.","description":"\u003cp\u003e300 g; ready to use immediately; Super strong MS polymer adhesive. Bonds immediately and withstands high loads. Permanently elastic and transparent. Resistant to climatic influences and UV rays - after hardening withstands from -40°C to +90°C. Construction adhesive K15; solvent-free; bonding with high wear resistance; resistant to weather conditions and UV rays; remains permanently elastic; can be painted with acrylic paints and latex; Extremely strong adhesive suitable for both absorbent and non-absorbent materials and surfaces - e.g. glazed tiles, metal, mirrors, glass, ceramics, PVC, polystyrene, wood, cork, stone, plaster, painted surfaces and plastic. For high bonding strength of mirrors, plinths, cable ducts, rigid foam, etc. Not suitable for acrylic glass, polyester, polypropylene, Teflon. The base must be dry, sound and free of dust and grease. Apply the adhesive to the desired surface at a distance of about 10 cm and press for about 10 minutes. Heavy parts must be fixed for 48 hours. Hardening 2 mm per day at a temperature of +23° C and air humidity of 55%. Do not use at temperatures below +5° C. Clean off any adhesive residue immediately. Store in a dry and ventilated place. After drying, it withstands temperatures from -40° C to +90° C.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489401086218,"sku":"61135001","price":15.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/61135001.jpg?v=1719470355"},{"product_id":"stiroporno-lepilo-dekofit-p-1kg","title":"Styrofoam glue Decofit-P 1kg","description":"\u003cp\u003e1 kg; ready to use immediately; Polystyrene adhesive for decorative profiles and cornices made of polystyrene and rigid foam, as well as for wall insulation and ceiling tiles made of polystyrene. For repair fleece under wallpaper and insulation boards (depron). Styrofoam adhesive Decofit-P cartridge. For decorative polystyrene\/polystyrene moldings, profiles, rosettes and ceiling tiles. The base must be sound, dry and free of dust and grease. Apply the adhesive well to the surface of the product to be glued, including the joints. Grout. Wipe off excess adhesive immediately with a damp sponge. Consumption rate: decorative profiles: +\/-70-150g\/m2, ceiling tiles: 250g\/sq.m. Moisture resistant. Non-flammable. Working temperature: 10-20° C.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489449976074,"sku":"60185001","price":5.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/60185001.jpg?v=1719471659"},{"product_id":"stiroporno-lepilo-dekofit-p-4kg","title":"Styrofoam glue Decofit-P 4kg","description":"\u003cp\u003e4 kg; ready to use immediately; Polystyrene adhesive for decorative profiles and cornices made of polystyrene and rigid foam, as well as for wall insulation and ceiling tiles made of polystyrene. For repair fleece under wallpaper and insulation boards (depron). Styrofoam adhesive Decofit-P cartridge. For decorative polystyrene\/polystyrene moldings, profiles, rosettes and ceiling tiles. The base must be sound, dry and free of dust and grease. Apply the adhesive well to the surface of the product to be glued, including the joints. Grout. Wipe off excess adhesive immediately with a damp sponge. Consumption rate: decorative profiles: +\/-70-150g\/m2, ceiling tiles: 250g\/sq.m. Moisture resistant. Non-flammable. Working temperature: 10-20° C.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489450303754,"sku":"60185002","price":15.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/60185002.jpg?v=1719471670"},{"product_id":"stiroporno-lepilo-dekofit-p-kartush-310ml","title":"Styrofoam glue Decofit-P cartridge 310ml","description":"\u003cp\u003eBranded polystyrene adhesive for decorative profiles and moldings made of polystyrene and rigid foam, as well as for wall insulation and polystyrene ceiling tiles. In the same color as the product, so that joints or other corrections are not noticeable! Styrofoam adhesive Decofit-P cartridge 310ml, ready to use immediately. For decorative polystyrene\/polystyrene moldings, profiles, rosettes and ceiling tiles. The base must be sound, dry and free of dust and grease. Apply the adhesive well to the surface of the product to be glued, including the joints. Grout. Wipe off excess adhesive immediately with a damp sponge. Consumption rate: decorative profiles: +\/-70-150g\/m2, ceiling tiles: 250g\/sq.m. Moisture resistant. Non-flammable. Operating temperature: 10-20° C.\u003c\/p\u003e","brand":"ТК ТАПЕТИя КИЛИМИя","offers":[{"title":"Default Title","offer_id":49489450729738,"sku":"60185003","price":4.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/files\/60185003.jpg?v=1719471683"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/2494\/9770\/collections\/61121702-2_c68e4bc3-efe7-452c-81d7-761046e6fd6e.jpg?v=1783995370","url":"https:\/\/tapetia.com\/en\/collections\/%d0%bb%d0%b5%d0%bf%d0%b8%d0%bb%d0%b0-%d0%b8-%d0%bf%d1%80%d0%b5%d0%bf%d0%b0%d1%80%d0%b0%d1%82%d0%b8-copy-1.oembed","provider":"ТК ТАПЕТИя КИЛИМИя","version":"1.0","type":"link"}